LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2016 >> Fusion Titanium, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Electronic Stability Control (ESC) System) >> ESC Control Module >> Repair procedures >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair procedures: Installation

WARNING: This page is about a different car, the 2014 Hyundai Elantra GT and 2013 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install in the reverse order of removal.
  2. Tighten the HECU mounting bolts and nuts to the specified torque.
  3. After installation, bleed the brake system.

    (Refer to BRAKE SYSTEM BLEEDING .

  4. When you have replaced the HECU always perform variant coding.
    NOTE: In a case of replacing HECU, operate the following functions.
    1. "Steering Angle Sensor Calibration" for steering angle sensor offset correction.
    2. "Longitudinal Sensor Calibration" for Longitudinal sensor offset correction.
scientia non olet · About LEMON Manuals