DTC U0401: Invalid Data Received from ECM/PCM A: Description

The PSCM monitors the HS-CAN messages when the ignition has been on for more than 5 seconds, the voltage to the PSCM is greater than 6.5 volts and there are no DTCs present inhibiting PSCM operation.

• DTC U0401:00 (Invalid Data Received from ECM/PCM A: No Sub Type Information) - This DTC sets if the PSCM receives "fault" or "unknown" messages from the PCM instead of valid accelerator pedal position, engine speed, engine torque, transmission gear or vehicle speed messages.