April 5, 2026: LEMON Manuals is launched! Read the announcement.

Powertrain Control Module (PCM): Removal

1.

NOTE: PCM installation DOES NOT require new keys or programming of keys, only a Parameter Reset of the PATS.

NOTE: This step is only necessary when installing a new component.

Download the module information to the diagnostic tool using the PMI routine. Refer to: Module Configuration - System Operation and Component Description .

2.

Unclip and position aside the BJB.

GFD130987

Courtesy of FORD MOTOR COMPANY

3.
- 1.
  
  Disconnect the PCM electrical connectors.
- 2.
  
  Remove the retainers and the PCM.

GFD130988

Courtesy of FORD MOTOR COMPANY