LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2017 >> Escape S >> Repair and Diagnosis >> External Pages >> Different car >> Section 260 (Side And Rear Vision System) >> Diagnosis And Testing >> Blind Spot Information System >> Pinpoint Tests >> Pinpoint Test I : DTC (Diagnostic Trouble Code) U0100:00, DTC (Diagnostic Trouble Code) U0101:00 >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pinpoint Test I : DTC (Diagnostic Trouble Code) U0100:00, DTC (Diagnostic Trouble Code) U0101:00: Notes

WARNING: This page is about a different car, the 2018 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

Refer to Module Communications Network for schematic and connector information.

Normal Operation and Fault Conditions 

The SODL and SODR communicate with the PCM through the BCM. The TCM is contained inside the PCM and cannot be serviced separately.

DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
U0100:00 Lost Communication with ECM/PCM "A": No Sub Type Information A continuous memory DTC that sets in in the SODL and SODR when messages received from the PCM over the HS-CAN through the BCM are missing for 2 seconds or more.
U0101:00 Lost Communication with TCM: No Sub Type Information

Possible Causes