RGTM Network Input Messages

WARNING: This page is about a different car, the 2019 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

Broadcast Message	Originating Module	Message Purpose
Central lock status	BCM	Used by the RGTM to inhibit power liftgate operation when the liftgate release switch is activated unless the doors have been previously electronically unlocked.
Selector lever (PRNDL) status	BCM	Used by the RGTM to inhibit power liftgate operation if the transmission is not in PARK.
Power liftgate request	BCM	Used by the RGTM to either open or close the power liftgate (on vehicles that have the power liftgate switch as part of the headlamp switch) or to inhibit power liftgate operation when the liftgate release switch is activated unless the doors have been previously unlocked electronically.
Passive liftgate request	RFA module	Used by the RGTM to either open or close the power liftgate. The RFA module sends this message to the RGTM when there is a liftgate RKE or passive key request.
Passive entry central lock command	RFA module	Used by the RGTM to inhibit power liftgate operation when the liftgate release switch is activated unless the doors have been previously electronically unlocked.