LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2017 >> Escape S >> Repair and Diagnosis >> External Pages >> Different car >> Section 575 (Engine Controls - Powertrain Diagnostics - DTC P0315 Through DTC P124C - (Diesel)) >> DTC P0602 - Powertrain Control Module Programming Error
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC P0602 - Powertrain Control Module Programming Error

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2019 Ford Transit-350 HD, 2019 Ford Transit-350, 2019 Ford Transit-250, 2019 Ford Transit-150, and 2019 Ford F-550 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
DTC DESCRIPTION P0602 - POWERTRAIN CONTROL MODULE PROGRAMMING ERROR

Description:  This DTC sets when a programming error within the vehicle identification (VID) block occurs.
Possible Causes: 
  • VID data corrupted by the scan tool during VID reprogramming
  • PCM reprogramming
  • Damaged PCM
Diagnostic Aids:  The VID block must be programmed. Refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) , Programming VID Block. If the PCM does not allow reprogramming of the VID block, reflashing of the PCM is required.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All Refer to the Description, Possible Causes and Diagnostic Aids for the DTC.
scientia non olet · About LEMON Manuals