Seat System DTCS: Front: DSM
| DTC | Description | Action |
|---|---|---|
| B1B86:00 | Seat Height Motor Relay: No Sub Type Information | GO to Pinpoint Test F |
| B1B87:11 | Seat Height Motor Speed/Position Sensor: Circuit Short To Ground | GO to Pinpoint Test F |
| B1B87:12 | Seat Height Motor Speed/Position Sensor: Circuit Short To Battery | GO to Pinpoint Test F |
| B1B88:00 | Seat Slide Motor Relay: No Sub Type Information | GO to Pinpoint Test F |
| B1B89:11 | Seat Slide Motor Speed/Position Sensor: Circuit Short To Ground | GO to Pinpoint Test F |
| B1B89:12 | Seat Slide Motor Speed/Position Sensor: Circuit Short To Battery | GO to Pinpoint Test F |
| B1B90:00 | Seat Tilt Motor Relay: No Sub Type Information | GO to Pinpoint Test F |
| B1B91:11 | Seat Tilt Motor Speed/Position Sensor: Circuit Short To Ground | GO to Pinpoint Test F |
| B1B91:12 | Seat Tilt Motor Speed/Position Sensor: Circuit Short To Battery | GO to Pinpoint Test F |
| B1B92:00 | Seat Recline Motor Relay: No Sub Type Information | GO to Pinpoint Test F |
| B1B93:11 | Seat Recline Motor Speed/Position Sensor: Circuit Short To Ground | GO to Pinpoint Test F |
| B1B93:12 | Seat Recline Motor Speed/Position Sensor: Circuit Short To Battery | GO to Pinpoint Test F |
| B1B94:24 | Seat Height Up Switch: Signal Stuck High | GO to Pinpoint Test F |
| B1B95:24 | Seat Height Down Switch: Signal Stuck High | GO to Pinpoint Test F |
| B1B96:24 | Seat Slide Forward Switch: Signal Stuck High | GO to Pinpoint Test F |
| B1B97:24 | Seat Slide Backward Switch: Signal Stuck High | GO to Pinpoint Test F |
| B1B98:24 | Seat Tilt Up Switch: Signal Stuck High | GO to Pinpoint Test F |
| B1B99:24 | Seat Tilt Down Switch: Signal Stuck High | GO to Pinpoint Test F |
| B1C00:24 | Seat Recline Up Switch: Signal Stuck High | GO to Pinpoint Test F |
| B1C01:24 | Seat Recline Down Switch: Signal Stuck High | GO to Pinpoint Test F |
| B1C03:23 | Memory #1 Switch: Signal Stuck Low | GO to Pinpoint Test G |
| B1C04:23 | Memory #2 Switch: Signal Stuck Low | GO to Pinpoint Test G |
| B1C05:23 | Memory #3 Switch: Signal Stuck Low | GO to Pinpoint Test G |
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | GO to Pinpoint Test L |
| U0199:00 | Lost Communication With "Door Control Module A": No Sub Type Information | GO to Pinpoint Test M |
| U0422:00 | Invalid Data Received From Body Control Module: No Sub Type Information | DIAGNOSE all non-network Diagnostic Trouble Codes (DTCs) from the BCM. REFER to: Body Control Module (BCM) . |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information |
NOTE:
This DTC indicates PMI has not been carried out on a newly installed module or configuration data has been lost. Presence of this DTC alone does not prevent basic seat operation from the seat control switch. Using a diagnostic scan tool, CARRY OUT PMI on the DSM. REPEAT the self-test and VERIFY successful PMI. CLEAR the Diagnostic Trouble Codes (DTCs). |
| U3000:49 | Control Module: Internal Electronic Failure | INSTALL a new DSM. REFER to: Driver Front Seat Module (DSM) . |