Powertrain/Drivetrain Mount Neutralizing
Adjustment
NOTE:
Refer to the appropriate information and procedure for special instructions on loosening and tightening mount fasteners.
- 1.
Refer to: Jacking and Lifting - Overview
.
- 2.
Loosen, but do not remove, the powertrain/drivetrain mount fasteners.
- 3.
Lower the vehicle.
- 4.
NOTE:
Do not twist or strain the powertrain/drivetrain mounts or damage to the mounts may occur.
Start the vehicle and move it in forward 0.6 m (1.97 ft) - 1.2 m (3.94 ft). Then move the vehicle in reverse the same distance.
- 5.
Raise and support the vehicle.
- 6.
Tighten the powertrain/drivetrain mount fasteners.
- 7.
Lower the vehicle.
- 8.
Test the system for normal operation.