Pinpoint Test O : The RKE (Remote Keyless Entry) Transmitter Is Inoperative (With Push-Button Start): Notes
Refer to Remote Keyless Entry And Alarm for schematic and connector information.
Normal Operations and Fault Conditions
Refer to: Handles, Locks, Latches and Entry Systems - System Operation and Component Description .
RFA Module DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U201F:00 | External Receiver: No Sub Type Information | Sets when the RFA module is missing messages from the Radio Frequency (RF) receiver. |
| U201F:13 | External Receiver: Circuit Open | Sets when the RFA module loses communication with the Radio Frequency (RF) receiver. |
Possible Causes
- Fuse
- Wiring, terminals or connectors
- Passive key
- Passive key battery
- Passive key button pressed a substantial amount of times while outside the range of the vehicle
- Passive key programming
- Network concern
- Radio Frequency (RF) receiver
- RFA module
Visual Inspection and Diagnostic Pre-checks
- Inspect the CJB fuse 7 (7.5A) and make sure it is OK.
- Inspect the passive key for damage.
- Check for aftermarket passive keys.