Pinpoint Test R : B12CA:11, B12CA:15: Notes
Refer to Parking Aid for schematic and connector information.
Normal Operation and Fault Conditions
When the ignition is turned on, the auto-start-stop system is automatically enabled and the indicator should be off. If the auto-start-stop system detects a malfunction, it is disabled, and the OFF lamp on the switch illuminates continuously. All other BCM and PCM Diagnostic Trouble Codes (DTCs) should be repaired first. The auto-start-stop status indicator and auto-start-stop disable switch are part of the active park assist switch assembly.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B12CA:11 | Start/Stop "Eco-Start" Status Indicator: Circuit Short To Ground | Sets when the BCM detects a short to ground on the auto-start-stop status indicator circuit. |
| B12CA:15 | Start/Stop "Eco-Start" Status Indicator: Circuit Short To Battery or Open | Sets when the BCM determines that the auto-start-stop status indicator circuit is not drawing current due to a circuit that is open or shorted to voltage. |
Possible Sources
- BCM
- Instrument panel console switch assembly
- Wiring, terminals or connectors