Image Display - Vehicles Equipped With An 4.2 in (107 mm) Display

NOTE: The luggage compartment lid must remain closed for correct operation of the rear parking aid camera system.

The rear parking aid camera image is displayed by the FCDIM when the reverse gear is selected. To determine the selector lever (automatic transmission) or gearshift lever (manual transmission) position and enable the rear parking aid camera display, the BCM sends the gear position message over the MS-CAN to the IPC. The IPC then sends the message to the FCDIM on the I-CAN. The rear parking aid camera generates a video signal any time it receives voltage, regardless of the current configuration. If the rear parking aid camera is not configured properly, some features may be inoperative. The rear parking aid camera is supplied voltage when the ignition is on. When the camera is on, the image signal is sent from the camera on shielded twisted pair wires to the FCDIM.

Vehicles equipped with the 4.2 in (107 mm) display do not have any features that can be configured by the driver. The system displays fixed guidelines that are generated by the rear parking aid camera and cannot be turned off. If the luggage compartment lid is open, the guidelines are not shown.