Powertrain Control Module (PCM): Removal
NOTE:
Removal steps in this procedure may contain installation details.
- 1.WARNING: Before beginning any service procedure in this service information, refer to Safety Warnings in General Information. Failure to follow this instruction may result in serious personal injury.
Refer to: Health and Safety Precautions
- 2.NOTE: Powertrain Control Module (PCM) installation DOES NOT require new keys or programming of keys, only a Parameter Reset of the PATS.NOTE: This step is only necessary when installing a new component.
Retrieve the module configuration. Carry out the module configuration retrieval steps of the Programmable Module Installation (PMI) procedure. REFER to: Module Configuration - System Operation and Component Description Use the General Equipment: Ford Diagnostic Equipment
- 3.
Remove the LHF fender splash shield. REFER to: Fender Splash Shield