LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2017 >> Focus S, Standard Trans, Gas/Ethanol >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Climate Control System - General Information (Except Electric Vehicle) >> Diagnosis And Testing >> Climate Control System - Vehicles With: Dual Automatic Temperature Control (DATC) >> Pinpoint Test(s) >> Pinpoint Test Q : B1A63:00, B1A64:00 >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pinpoint Test Q : B1A63:00, B1A64:00: Notes

Refer to AUTOMATIC CLIMATE CONTROL SYSTEM for schematic and connector information.

Normal Operation and Fault Conditions 

Sunload sensor, REFER to: Climate Control System - Vehicles With: Dual Automatic Temperature Control (DATC) 

DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
B1A63:00 Right Solar Sensor: No Sub Type Information This Continuous Memory Diagnostic Trouble Code (CMDTC) sets when the HVAC control module senses unexpected voltage from the sunload sensor input circuit indicating an open, short to voltage or short to ground.
B1A64:00 Left Solar Sensor: No Sub Type Information This Continuous Memory Diagnostic Trouble Code (CMDTC) sets when the HVAC control module senses unexpected voltage from the sunload sensor input circuit indicating an open, short to voltage or short to ground.

Possible Sources