Front Seats - Overview: Overview

Driver Power Seat 

The seat control switch contains normally closed contacts which are grounded. An individual circuit is switched to voltage when a specific adjustment position is selected. The seat control switch is hard-wired directly to the applicable seat motors. The motor direction is determined by the polarity of voltage supplied from the seat control switch.

The driver power seat is equipped with the following motors:

• Rear height motor (serviced with seat track assembly)
• Horizontal motor (the only seat track motor which can be serviced separately from the seat track assembly)
• Recliner motor (serviced with seat backrest assembly)
• Lumbar motor (serviced with power lumbar assembly)

Heated Seats 

This system allows on demand independent electrical heating of each front seat.

The heated seat system consists of the following components:

• Seat heater mats (located on the seat cushion and backrest)
• Heated seat modules (located under each seat cushion)
• Heated seat control switches (located on the HVAC module)