Normal Operation and Fault Conditions
WARNING: This page is about a different car, the 2017 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
With the ignition ON, the RCM sends messages to the SECM over the HS-CAN 2 and through the SASM. If the SECM does not receive these messages within a certain time frame, the SECM sets a DTC. For information on the messages sent to the SECM by the RCM, refer to the Network Message Chart in the Description and Operation in Power Steering System .
SECM DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0151:00 | Lost Communication With Restraints Control Module: No Sub Type Information | Sets when the SECM detects any of the RCM messages is missing. This can be due to a RCM failure, a circuit failure on the HS-CAN2 or an excessive load on the network. |