Cruise Control DTCS: Abs
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| U0405:41 | Invalid Data Received From Cruise Control Module: General Checksum Failure | This DTC sets when the ABS module receives invalid network data from the CCM. RETRIEVE and REPAIR all non network diagnostic trouble codes (DTCs) in the CCM. |
| U0405:82 | Invalid Data Received From Cruise Control Module: Alive/Sequence Counter Incorrect/Not Updated | This DTC sets when the ABS module receives invalid network data from the CCM. RETRIEVE and REPAIR all non-network diagnostic trouble codes (DTCs) in the CCM. |
| U0405:86 | Invalid Data Received From Cruise Control Module: Signal Invalid | This DTC sets when the ABS module receives invalid network data from the CCM. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the CCM and other modules on the network. |
| U2107:00 | Collision Mitigation By Braking: No Sub Type Information | This DTC sets in the ABS module due to long and too frequent collision mitigation brake requests from the CCM RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the CCM and other modules on the network. |
| U2107:68 | Collision Mitigation By Braking: Event Information | This DTC is set in the ABS module due to a high acceleration value detected that differs from request, which can be caused by an abrupt vehicle stop or module failure. RETRIEVE and REPAIR all Diagnostic Trouble Codes (DTCs) in the CCM and ABS module. |
| All other Diagnostic Trouble Codes (DTCs) | - | REFER to: Anti-Lock Brake System (ABS) And Stability Control (Hybrid/Energi) . |