Pinpoint Test E : The Remote Start Is Inoperative: Notes
Diagnostic Overview
Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to Diagnostic Methods in Service Information for information about these practices.
Normal Operation and Fault Conditions
The factory equipped remote start system enables the engine to be started up to 100 meters (328 feet) away by pressing the Intelligent Access (IA) key lock button followed by 2 presses of the remote start button. The 3 button presses must occur within 3 seconds. The IA key signal is received through an external antenna attached to the Tire Pressure Monitor Module (TPM) and communicated over the Medium Speed Controller Area Network (MS-CAN) to initiate the vehicle start.
Possible Sources
- Remote start feature enabled
- IA key
- External antenna
- Hood switch input
- PCM
- Wiring, terminals or connectors