Removal And Installation: Generator: Installation

WARNING: This page is about a different car, the 2016 Lincoln MKS. However, it is still accessible from the selected car via links, so may be relevant.

Radial arm installation only

1.
1. 1.
  
  Tighten to 9 Nm (80 lb-in).
1. 2.
  
  Tighten to 17 Nm (150 lb-in).

Courtesy of FORD MOTOR COMPANY

All vehicles

Courtesy of FORD MOTOR COMPANY

3.
- Tighten to 8 Nm (71 lb-in).

Courtesy of FORD MOTOR COMPANY

4.
- Tighten to 47 Nm (35 lb-ft).

Courtesy of FORD MOTOR COMPANY

5.
- Tighten to 47 Nm (35 lb-ft).

Courtesy of FORD MOTOR COMPANY

6.
- Tighten to 17 Nm (150 lb-in).

Courtesy of FORD MOTOR COMPANY

Vehicles equipped with a 3.5L GTDI engine

7.

Install the A/C compressor. For additional information, refer to Climate Control .

Vehicles equipped with a 3.7L Ti-VCT engine

Courtesy of FORD MOTOR COMPANY

9.

Install the cooling fan assembly. For additional information, refer to Engine Cooling .

All vehicles

10.

Connect the battery cable. For additional information, refer to Battery, Mounting and Cables .