System Operation: Panel/Floor

When PANEL/FLOOR mode is selected:

• the recirculated air request button is enabled. If the recirculated air request button is selected (indicator on), the air inlet door closes, preventing outside air from entering the passenger compartment. If the recirculated air request button is not selected (indicator off), the air inlet door opens, allowing only outside air into the passenger compartment.
• the air distribution doors operate in combination to direct airflow to the floor duct and the instrument panel registers. A small amount of airflow from the side window demisters and defrost duct is present.
• blended air temperature is available. The airflow temperature is only cooled below the outside air temperature when the A/C is commanded on.
• the blower motor is on and the speed is adjustable.