Recalling a Stored Memory Position

WARNING: This page is about a different car, the 2015 Lincoln MKS. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: A memory recall can be initiated only if the vehicle is in PARK or NEUTRAL gear and the ignition is not in START. A memory recall in progress will not be affected by placing the ignition in START or by moving the gearshift lever out of PARK or NEUTRAL.

NOTE: Input from the driver seat control switch, memory SET switch, pedal adjust switch (if equipped), exterior mirror control switch (if equipped) or steering column control switch (if equipped) during a memory recall will abort the memory recall.

1.

The driver can recall the desired memory driver seat, memory exterior mirror (if equipped), memory adjustable pedal (if equipped) and memory steering column (if equipped) positions by pressing either memory SET switch button 1, 2 or 3. Pressing memory SET switch button 1 will initiate a recall of the positions stored for memory 1. Pressing memory SET switch button 2 will initiate a recall of the positions stored for memory 2. Pressing memory SET switch button 3 will initiate a recall of the positions stored for memory 3.