LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2017 >> Fusion Titanium, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 320 (Side And Rear Vision System) >> Description And Operation >> Blind Spot Information System - System Operation and Component Description >> System Operation >> BLIS ®
April 5, 2026: LEMON Manuals is launched! Read the announcement.

BLIS ®

WARNING: This page is about a different car, the 2016 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: On vehicles equipped with factory trailer tow, if a trailer is electrically connected to the vehicle, the BLIS ® is disabled.
NOTE: On vehicles without factory trailer tow, if a trailer is connected to the vehicle, the BLIS ® system may detect the trailer and cause a false alert.

The BLIS ® provides alerts to the driver when the vehicle is in a forward gear and the vehicle speeds is greater than 10 km/h (6 mph).

The BLIS ® can trigger an alert for vehicles that enter the blind zone from the rear, front, or merge into the blind zone from the side. The exterior mirror BLIS ®/Cross Traffic Alert (CTA) LED illuminates in the right and/or left exterior mirror when a target is present. For vehicles that pass through the blind zone quickly, typically less than 2 seconds, the BLIS ® may not trigger an alert.

If a turn signal is active while BLIS ® has detected a target in the blind zone, the BLIS ®/Cross Traffic Alert (CTA) LED flashes rapidly. When the turn signal is off, the BLIS ® target warnings are a constant LED illumination.

NOTE: The BLIS ® is not intended to detect parked vehicles, pedestrians, or objects such as fences, guard rails or trees.

Due to the nature of radar technology, false alerts may occur under certain circumstances. False alerts occur when the LED illuminates with no target present. False alerts up to 3% (3 out of 100 targets) is considered normal operation. False alerts are temporary and self-correcting. False alerts may be caused by sharp turns around a pole or building, jogging pedestrians or fast moving shopping carts.

Missed targets occur when a target is present and the LED does not illuminate. Missed targets up to 1% (1 out of 100 targets) is considered normal operation.

Circumstances that cause missed alerts are: 

The BLIS ® may not detect an adjacent target immediately when the vehicle accelerates from a standing start with another vehicle alongside.