Pinpoint Test E : The Sod-R Does Not Respond To The Scan Tool Or Cannot Be Configured: Notes
WARNING: This page is about a different car, the 2015 Lincoln MKS. However, it is still accessible from the selected car via links, so may be relevant.
Pinpoint Test E: The SOD-R Does Not Respond To The Scan Tool Or Cannot Be Configured
Diagnostic Overview
Diagnostics in this service information assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to Diagnostic Methods in Service Information for information about these practices.
Refer to Wiring Diagrams Vehicle Emergency Messaging System , for schematic and connector information.
Normal Operation and Fault Conditions
The SOD-R uses an address ground pin for configuration. The address ground is necessary so the BLIS® or the CTA system can decipher between the SOD-R and the SOD-L during configuration. The SOD-R communicates over the MS-CAN.