Parking Aid System DTCS: PAM
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| B129C:12 | Left Front Side Sensor: Circuit Short To Battery | REFER to: Parking Aid . |
| B129C:14 | Left Front Side Sensor: Circuit Short To Ground or Open | REFER to: Parking Aid . |
| B129C:96 | Left Front Side Sensor: Component Internal Failure | REFER to: Parking Aid . |
| B129D:12 | Right Front Side Sensor: Circuit Short To Battery | REFER to: Parking Aid . |
| B129D:14 | Right Front Side Sensor: Circuit Short To Ground or Open | REFER to: Parking Aid . |
| B129D:96 | Right Front Side Sensor: Component Internal Failure | REFER to: Parking Aid . |
| B129E:11 | Enable/Disable Switch - Semi-automatic Advanced Parallel Park: Circuit Short To Ground | REFER to: Parking Aid . |
| B1303:11 | Park Assist Switch: Circuit Short To Ground | GO to Pinpoint Test J |
| B13F3:12 | Left Rear Side Sensor: Circuit Short To Battery | REFER to: Parking Aid . |
| B13F3:14 | Left Rear Side Sensor: Circuit Short To Ground or Open | REFER to: Parking Aid . |
| B13F3:96 | Left Rear Side Sensor: Component Internal Failure | REFER to: Parking Aid . |
| B13F4:12 | Right Rear Side Sensor: Circuit Short To Battery | REFER to: Parking Aid . |
| B13F4:14 | Right Rear Side Sensor: Circuit Short To Ground or Open | REFER to: Parking Aid . |
| B13F4:96 | Right Rear Side Sensor: Component Internal Failure | REFER to: Parking Aid . |
| B1B36:12 | Right Front Outer Sensor: Circuit Short To Battery | GO to Pinpoint Test G |
| B1B36:14 | Right Front Outer Sensor: Circuit Short To Ground or Open | GO to Pinpoint Test H |
| B1B36:96 | Right Front Outer Sensor: Component Internal Failure | GO to Pinpoint Test I |
| B1B38:12 | Right Front Inner Sensor: Circuit Short To Battery | GO to Pinpoint Test G |
| B1B38:14 | Right Front Inner Sensor: Circuit Short To Ground or Open | GO to Pinpoint Test H |
| B1B38:96 | Right Front Inner Sensor: Component Internal Failure | GO to Pinpoint Test I |
| B1B40:12 | Left Front Outer Sensor: Circuit Short To Battery | GO to Pinpoint Test G |
| B1B40:14 | Left Front Outer Sensor: Circuit Short To Ground or Open | GO to Pinpoint Test H |
| B1B40:96 | Left Front Outer Sensor: Component Internal Failure | GO to Pinpoint Test I |
| B1B42:12 | Left Front Inner Sensor: Circuit Short To Battery | GO to Pinpoint Test G |
| B1B42:14 | Left Front Inner Sensor: Circuit Short To Ground or Open | GO to Pinpoint Test H |
| B1B42:96 | Left Front Inner Sensor: Component Internal Failure | GO to Pinpoint Test I |
| B1B44:12 | Right Rear Outer Sensor: Circuit Short To Battery | GO to Pinpoint Test E |
| B1B44:14 | Right Rear Outer Sensor: Circuit Short To Ground or Open | GO to Pinpoint Test D |
| B1B44:96 | Right Rear Outer Sensor: Component Internal Failure | GO to Pinpoint Test F |
| B1B46:12 | Right Rear Inner Sensor: Circuit Short To Battery | GO to Pinpoint Test E |
| B1B46:14 | Right Rear Inner Sensor: Circuit Short To Ground or Open | GO to Pinpoint Test D |
| B1B46:96 | Right Rear Inner Sensor: Component Internal Failure | GO to Pinpoint Test F |
| B1B48:12 | Left Rear Outer Sensor: Circuit Short To Battery | GO to Pinpoint Test E |
| B1B48:14 | Left Rear Outer Sensor: Circuit Short To Ground or Open | GO to Pinpoint Test D |
| B1B48:96 | Left Rear Outer Sensor: Component Internal Failure | GO to Pinpoint Test F |
| B1B50:12 | Left Rear Inner Sensor: Circuit Short To Battery | GO to Pinpoint Test E |
| B1B50:14 | Left Rear Inner Sensor: Circuit Short To Ground or Open | GO to Pinpoint Test D |
| B1B50:96 | Left Rear Inner Sensor: Component Internal Failure | GO to Pinpoint Test F |
| B1B54:11 | Function LED - Park Aid: Circuit Short To Ground | GO to Pinpoint Test K |
| B1B54:12 | Function LED - Park Aid: Circuit Short To Battery | GO to Pinpoint Test K |
| B1B57:11 | Front Sensors Power Circuit: Circuit Short To Ground | GO to Pinpoint Test B |
| B1B58:11 | Rear Sensors Power Circuit: Circuit Short To Ground | GO to Pinpoint Test C |
| U0100:00 | Lost Communication With ECM/PCM "A": No Sub Type Information | GO to Pinpoint Test L |
| U0101:00 | Lost Communication with TCM: No Sub Type Information | GO to Pinpoint Test M |
| U0121:00 | Lost Communication With Anti-Lock Brake System (ABS) Control Module: No Sub Type Information | GO to Pinpoint Test N |
| U0131:00 | Lost Communication With Power Steering Control Module: No Sub Type Information | GO to Pinpoint Test O |
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | GO to Pinpoint Test P |
| U0146:00 | Lost Communication With Gateway "A": No Sub Type Information | GO to Pinpoint Test Q |
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | GO to Pinpoint Test R |
| U0212:00 | Lost Communication With Steering Column Control Module: No Sub Type Information | GO to Pinpoint Test S |
| U0253:00 | Lost Communication With Accessory Protocol Interface Module: No Sub Type Information | GO to Pinpoint Test T |
| U0256:00 | Lost Communication With Front Controls Interface Module "A" : No Sub Type Information | GO to Pinpoint Test U |
| U0257:00 | Lost Communication With Front Controls / Display Interface Module : No Sub Type Information | GO to Pinpoint Test V |
| U0293:00 | Lost Communication With Hybrid/EV Powertrain Control Module: No Sub Type Information | GO to Pinpoint Test W |
| U0401:00 | Invalid Data Received From ECM/PCM A: No Sub Type Information | This DTC sets when the PAM receives invalid network data from the PCM with a faulted signal data input. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the other modules on the network. |
| U0402:00 | Invalid Data Received From TCM: No Sub Type Information | This DTC sets when the PAM receives invalid network data from the TCM with a faulted signal data input. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the other modules on the network. |
| U0415:00 | Invalid Data Received From Anti-Lock Brake System (ABS) Control Module: No Sub Type Information | This DTC sets when the PAM receives invalid network data from the ABS module with a faulted signal data input. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the other modules on the network. |
| U0420:00 | Invalid Data Received From Power Steering Control Module: No Sub Type Information | This DTC sets when the PAM receives invalid network data from the PSCM with a faulted signal data input. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the other modules on the network. |
| U0422:00 | Invalid Data Received From Body Control Module: No Sub Type Information | This DTC sets when the PAM receives invalid network data from the BCM with a faulted signal data input. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the other modules on the network. |
| U0423:00 | Invalid Data Received from Instrument Panel Cluster Control Module: No Sub Type Information | This DTC sets when the PAM receives invalid network data from the IPC with a faulted signal data input. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the other modules on the network. |
| U0429:00 | Invalid Data Received From Steering Column Control Module: No Sub Type Information | This DTC sets when the PAM receives invalid network data from the SCCM with a faulted signal data input. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the other modules on the network. |
| U0554:00 | Invalid Data Received From Accessory Protocol Interface Module: No Sub Type Information | This DTC sets when the PAM receives invalid network data from the APIM with a faulted signal data input. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the other modules on the network. |
| U0557:00 | Invalid Data Received From Front Controls Interface Module "A": No Sub Type Information | This DTC sets when the PAM receives invalid network data from the FCIM with a faulted signal data input. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the other modules on the network. |
| U0594:00 | Invalid Data Received From Hybrid/EV Powertrain Control Module: No Sub Type Information | This DTC sets when the PAM receives invalid network data from the TCM with a faulted signal data input. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the other modules on the network. |
| U2024:41 | Control Module Cal-Config Data: General Checksum Failure | CLEAR the Diagnostic Trouble Codes (DTCs) and REPEAT the PAM self-test. If DTC U2024:41 is retrieved again, PROGRAM the PAM REFER to: Module Configuration - System Operation and Component Description (418-01 Module Configuration, Description and Operation). REPEAT the self-test. If DTC U2024:41 is retrieved again, Refer to BCM Hardware Testing -- Fusion (Except Hybrid) |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | CHECK the vehicle service history for recent service actions related to this module. This DTC sets due to incomplete or incorrect PMI procedures. If there have been recent service actions with this module, CARRY OUT the PMI procedure using as-built data to: Module Configuration - System Operation and Component Description . If there have been no recent service actions, BCM Hardware Testing -- Fusion (Except Hybrid) |
| U2101:00 | Control Module Configuration Incompatible: No Sub Type Information | CHECK the vehicle service history for recent service actions related to this module. This DTC sets due to incomplete or incorrect PMI procedures. If there have been recent service actions with this module, CARRY OUT the PMI procedure using as-built data. Refer to: Module Configuration - System Operation and Component Description . If there have been no recent service actions, BCM Hardware Testing -- Fusion (Except Hybrid) |