Diagnostic Aids
When DTC C1B00:2F is set, the PSCM enters into reduced assist mode and sends a message to the IPC to display POWER STEERING ASSIST FAULT in the message center.
| Failure | Action |
|---|---|
| 00 | Go to PINPOINT TEST B |
| 2F | Go to PINPOINT TEST B |
When DTC C1B00:2F is set, the PSCM enters into reduced assist mode and sends a message to the IPC to display POWER STEERING ASSIST FAULT in the message center.
| Failure | Action |
|---|---|
| 00 | Go to PINPOINT TEST B |
| 2F | Go to PINPOINT TEST B |