LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2017 >> Taurus SHO >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 6F50/6F55 >> Disassembly And Assembly Of Subassemblies >> Transaxle Case >> Disassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transaxle Case: Disassembly

  1. 1.

    Special Tool(s): Remover/Installer, Front Wheel Hub 204-069 (T81P-1104-C), Transfer Gear Bearing Race Remover 307-577
GFD83953Courtesy of FORD MOTOR COMPANY

  1. 2.

    Punch a hole in the fluid dam. Center punch.
GFD83954Courtesy of FORD MOTOR COMPANY

  1. 3.

    General Equipment: Dent Puller
GFD83955Courtesy of FORD MOTOR COMPANY

  1. 4.

    Special Tool(s): Differential Bearing Cup Remover 307-586

    1. 1.

      Position the Differential Bearing Cup Remover 307-586 in the transmission case with the tabs on the Differential Bearing Cup Remover 307-586 aligned with the slots in the transmission case.

    1. 2.

      Expand the Differential Bearing Cup Remover 307-586 by hand.

    1. 3.

      While holding the Differential Bearing Cup Remover 307-586 in the expanded position with the tabs in the slots of the transmission case, tighten the nut.
GFD83956Courtesy of FORD MOTOR COMPANY

  1. 5.

    General Equipment: Shop Press
GFD83957Courtesy of FORD MOTOR COMPANY

  1. 6.

GFD83958Courtesy of FORD MOTOR COMPANY

  1. 7.

GFD83959Courtesy of FORD MOTOR COMPANY

  1. 8.

GFD83960Courtesy of FORD MOTOR COMPANY

  1. 9.

GFD83961Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals