Pinpoint Test P : DTC (Diagnostic Trouble Code) B10A2:02: Notes
WARNING: This page is about a different car, the 2016 Ford Transit Connect. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Supplemental Restraint System for schematic and connector information.
Normal Operation and Fault Conditions
When an impact occurs which exceeds a pre-determined threshold, the RCM sends a signal on a dedicated circuit to the BCM. The event notification feature provides information pertaining to fuel cutoff status.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B10A2:02 | Crash Input General Failure Information: General Signal Failure | A continuous memory DTC that sets in the BCM if the 5 volt signal from the RCM is missing. |
Possible Sources
- Wiring, terminals or connectors
- RCM
- BCM