LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2017 >> Transit Connect Titanium >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Handles, Locks, Latches And Entry Systems >> General Procedures >> Remote Keyless Entry (RKE) Transmitter Programming
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Remote Keyless Entry (RKE) Transmitter Programming

For information on Ford Color Coded Illustrations refer to OEM Color Coding .

Programming 

NOTE: All RKE transmitters must be programmed at the same time. Entering the programming mode erases all previously programmed RKE transmitters (Integrated Keyhead Transmitters (IKTs) and key fobs). The PATS portion of the programmed Integrated Keyhead Transmitters (IKTs) is unaffected.
  1. WARNING: Before beginning any service procedure, refer to Safety Warnings in General Information. Failure to follow this instruction may result in serious personal injury.

    Refer to: Health and Safety Precautions .

  2. Use the door lock control switch to unlock the doors.
  3. Cycle the ignition from OFF to RUN to OFF 8 times in rapid succession (within 10 seconds), with the last turn ending in OFF. If the module successfully enters program mode, a chime sounds.
  4. NOTE: Programming mode ends when:

    • the ignition transitions ON.
    • 10 seconds elapse since entering programming mode or since the last RKE transmitter was programmed (a chime sounds to confirm that programming is complete).

    Within 10 seconds, press and hold any button on the RKE transmitter to be programmed until a chime sounds to confirm the RKE transmitter is programmed. Repeat this step for each RKE transmitter.

  5. Check the operation of the RKE transmitters. If the door locks do not respond for the programmed RKE transmitter(s), wait several seconds and press the button again. If the door locks still fail to respond, diagnose the RKE transmitter(s).
scientia non olet · About LEMON Manuals