Fuel Pump Control - All Others: Notes
NOTE:
The Continental 3.0L, Focus 2.3L, Ford GT and MKZ 3.0L use 2 fuel pump control modules to control fuel for the fuel delivery system. The PCM sends one FP duty cycle on the FPC circuit. Both fuel pump control modules use this circuit.
The FP signal is a duty cycle command sent from the PCM to the fuel pump control module. The fuel pump control module uses the FP command to operate the fuel pump at the speed requested by the PCM or to turn the fuel pump OFF. A valid duty cycle to command the fuel pump ON, is in the range of 15-47%. The fuel pump control module doubles the received duty cycle and provides this voltage to the fuel pump as a percent of the battery voltage. When the ignition is turned ON, the fuel pump runs for about 1 second and is requested OFF by the PCM if engine rotation is not detected.