LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2017 >> Transit Connect Titanium >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Handles, Locks, Latches And Entry Systems) >> Diagnosis And Testing >> Locks, Latches and Entry Systems - Vehicles With: One-Touch Open and Close Front Windows >> Pinpoint Tests >> Pinpoint Test X : U3003:62 >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pinpoint Test X : U3003:62: Notes

WARNING: This page is about a different car, the 2016 Ford Transit Connect. However, it is still accessible from the selected car via links, so may be relevant.

Refer to Power Door Locks for schematic and connector information.

Normal Operation and Fault Conditions 

The DDM/ PDM are supplied voltage at all times. The module monitors this voltage and also receive a battery voltage message from the BCM If the voltage to the DDM/ PDM drops low enough, all door module functions are inoperative.

DDM/ PDM DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
U3003:62 Battery Voltage: Signal Compare Failure Sets when the DDM/ PDM detects the voltage amount from the supply circuit is significantly lower than what is reported from the BCM.

Possible Causes 

scientia non olet · About LEMON Manuals