LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2017 >> Transit Connect Titanium >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Automatic Transmission External Controls) >> Removal And Installation >> Selector Lever Cable >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Selector Lever Cable: Installation

WARNING: This page is about a different car, the 2016 Ford Transit Connect. However, it is still accessible from the selected car via links, so may be relevant.

  1. 1.

    NOTE: Gearshift cables must not be kinked or bent.

    Attach a pull cord to the selector lever cable. Use the General Equipment: Draw Cord Use the General Equipment: Adhesive Tape

GFD150342Courtesy of FORD MOTOR COMPANY

  1. 2.

    To install, reverse the removal procedure.

  1. 3.

    Adjust the selector lever cable. Refer to: Selector Lever Cable Adjustment .
scientia non olet · About LEMON Manuals