Network Message Chart
Module Network Input Messages - PDM
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Passenger mirror command | DDM | When the exterior mirror control switch requests movement of the RH exterior mirror, the DDM sends the request to the PDM to drive the RH exterior mirror motor in the desired direction. |
Module Network Input Messages - DDM and PDM
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Outer mirror defrost command | BCM | Used to command the heated mirrors on and off. |
Module Network Input Messages - PDM
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Central lock last command | BCM | Provides the DDM with information on what initiated the last lock event. |
| Central lock command | BCM | In addition to locking or unlocking the door, the DDM uses this message to fold or unfold the LH exterior mirror. |
Module Network Input Messages - PDM
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Passenger mirror fold command | DDM | When an exterior mirror fold or unfold is initiated by the driver by pressing the mirror fold switch or unlocking / locking the vehicle, the DDM sends the request to the PDM to fold or unfold the RH exterior mirror. |