DTC U0001 High Speed CAN Communications Bus: Description

The PSCM monitors the HS-CAN messages when the ignition has been on for more than 5 seconds, when the voltage to the PSCM is greater than 9 volts and when there are no DTCs present inhibiting PSCM operation.

• DTC U0001:08 (High Speed Can Communication Bus: Bus Signal/Message Failure) - This DTC sets if the PSCM is unable to communicate with any other modules on the HS-CAN for greater than the allotted amount of time.
• DTC U0001:88 (High Speed Can Communication Bus:Bus Off) - This DTC sets if the PSCM is unable to communicate with any other modules on the HS-CAN for greater than the allotted amount of time.