Tire Pressure Monitoring System (TPMS) DTCS: RTM
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| U0146:00 | Lost Communication with Gateway "A": No Sub Type Information | GO to Pinpoint Test H |
| U0401:00 | Invalid Data Received from ECM / PCM "A": No Sub Type Information | This DTC sets when the RTM receives invalid network data from the PCM. RETRIEVE and DIAGNOSE all non-network Diagnostic Trouble Codes (DTCs) in the PCM. For 2.0L, refer to: Electronic Engine Controls . For 2.7L, refer to: Electronic Engine Controls . For 3.5L. refer to: Electronic Engine Controls . |
| U0401:82 | Invalid Data Received from ECM / PCM "A": Alive / Sequence Counter Incorrect / Not Updated | This DTC sets when the RTM receives invalid network data from the PCM. RETRIEVE and DIAGNOSE all non-network Diagnostic Trouble Codes (DTCs) in the PCM. For 2.0L, refer to: Electronic Engine Controls . For 2.7L, refer to: Electronic Engine Controls . For 3.5L. refer to: Electronic Engine Controls . |
| U1A00:00 | Private Communication Network: No Sub Type Information | GO to Pinpoint Test I |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | This DTC is present when a new RTM is installed, or when the RTM is incorrectly flashed or reconfigured. This DTC clears when the RTM is correctly configured. Using a diagnostic scan tool, CONFIGURE the RTM. FOLLOW all diagnostic scan tool instructions. |
| U3000:04 | Control Module: System Internal Failure | CHECK vehicle service history for recent service actions related to this module. This DTC sets due to incomplete or improper PMI procedures. If there have been recent service actions with this module, REPEAT the PMI procedure as directed by the diagnostic scan tool. If there have been no recent service actions, INSTALL a new RTM to correct the failure to retain configuration data. REFER to: Radio Transceiver Module (RTM) . |