Network Message Chart
WARNING: This page is about a different car, the 2017 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
Network Input Messages - ACM
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Instrument panel cluster chime | IPC | Data used to command a warning chime during possible collision event and audio mute so that the warning chime can be heard. |
Network Input Messages - CCM
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| HUD data | HUD module | Used for HUD module active, available and fault status. |
| Forward collision sensitivity setting | BCM | Data used to set the detection sensitivity of the collision warning. |
Network Input Messages - HUD
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| HUD flash command | CCM | Flashes the HUD module LED array when commanded. |
| Ignition status | BCM | Used for ignition switch position input. |
Network Input Messages - IPC
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Forward collision chime request | BCM | Data used to command warning chime during possible collision event. When this message is received, the IPC sends the audio mute message to the ACM. |
| Forward collision warning message request | BCM | Data used to command warning chime and messages during possible collision event. |