DTC C1B00: Steering Angle Sensor

WARNING: This page is about a different car, the 2019 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

Failure	Action
09	INSTALL a new steering wheel rotation sensor. REFER to the appropriate Removal and Installation procedure in the Steering Wheel and Column Electrical Components article.
29	REMOVE the steering wheel rotation sensor. INSPECT the connector terminals for bent pins, pushed-out pins, spread terminals and foreign material. REPAIR as necessary. If the connector terminals are OK, INSTALL a new steering wheel rotation sensor. REFER to the appropriate Removal and Installation procedure in the Steering Wheel and Column Electrical Components article.