LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2018 >> Expedition SSV, 4WD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls - Fuel Charging And Controls - 3.5L ECOBOOST (272KW/370PS) >> Removal And Installation >> Fuel Pump Driver Module (FPDM) >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Pump Driver Module (FPDM): Removal

For information on Ford Color Coded Illustrations refer toOEM Color Coding

NOTE: The top frame mounted fuel pump driver module is located on top of the left frame rail behind, the left rear wheelwell or the side frame mounted fuel pump driver module is located midway, on the outside of the left frame rail.

All Vehicles 

  1. With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting .

    Top Frame Mounted 

  2. Remove the left rear splash shield retainer, then position the left rear splash shield out of the way.
    GFD292916Courtesy of FORD MOTOR COMPANY
  3. Disconnect the fuel pump driver module electrical connector.
    GFD292917Courtesy of FORD MOTOR COMPANY
  4. Remove the fuel pump driver module bolts, then remove the fuel pump driver module.
    GFD292918Courtesy of FORD MOTOR COMPANY

    Side Frame Mounted 

  5. Remove the fuel pump driver module cover retainers, then remove the fuel pump driver module cover.
    GFD292919Courtesy of FORD MOTOR COMPANY
  6. Disconnect the fuel pump driver module electrical connector.
    GFD292920Courtesy of FORD MOTOR COMPANY
  7. Remove the fuel pump driver module bolts, then remove the fuel pump driver module.
GFD292921Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals