Rear Climate Controls - RHVAC Control Module
WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
The customer interface from the rear climate control panel consists of the following selections:
- Fan speed control: Adjust the volume of air circulated in the rear of the vehicle.
- Heated seats: Press the button to switch the heated seats on to the desired level of heating. Three levels of heating can be selected by successive press of this button. A further button press would turn off the heating.
- AUTO: Press the button to switch on automatic operation. Adjust to select the desired temperature. Fan speed and air distribution are automatically adjusted to heat or cool the vehicle to maintain the desired temperature.
- Air distribution control: Press the button to turn airflow from the console or footwell vents on or off. You can distribute air through any combination of these vents.
- Temperature control: Adjust the temperature of the air circulated in the rear of the vehicle.
- Ventilated seats: Press to switch the ventilated seats on and off.
- Power: Press to switch the rear system on and off.
- Rear climate control lock indicator: When illuminated, you can only operate the rear passenger settings through the front controls.
For illustrations and rear climate control button operation information, refer to the Owner's Literature.