Driver Front Seat Module (DSM): Installation

WARNING: This page is about a different car, the 2018 Lincoln Continental. However, it is still accessible from the selected car via links, so may be relevant.

All vehicles

To install, reverse the removal procedure.
NOTE: This step is only necessary when installing a new component.

Using a diagnostic scan tool, complete the PMI process for the DSM or SCMB (front passenger seat control module) following the on-screen instructions.

Vehicles with climate controlled seats
NOTE: This step is only necessary when installing a new DSM.

Using a diagnostic scan tool, complete the PMI process for the SCME following the on-screen instructions.

All vehicles
Repower the SRS. Refer to: Supplemental Restraint System (SRS) Repowering .
NOTE: This step is only necessary when installing a new DSM.

Operate the seat in all directions through the full range of travel to set soft stops on all memory controlled functions and avoid a premature stopping point occurrence after the vehicle is returned to the customer.

Vehicles with memory steering column
NOTE: This step is only necessary when installing a new DSM.

Operate the steering column in all directions through the full range of travel to set the soft stops and avoid a premature stopping point occurrence after the vehicle is returned to the customer.