Four Wheel Drive System DTCS: ATCM
Network DTCs (U-codes) are often a result of intermittent concerns such as damaged wiring or low battery voltage occurrences. Additionally, vehicle repair procedures, such as module reprogramming, often set network DTCs. Replacing a module to resolve a network DTC is unlikely to resolve the concern. To prevent repeat network DTC concerns, inspect all network wiring, especially connectors. Test the vehicle battery. REFER to: Battery .
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| B142F:67 | Wheel Change Manager All Terrain System State: Signal Incorrect After Event setting | CLEAR the DTC. REPEAT the self-test. If the DTC returns, INSTALL a new all terrain control module. |
| C1A02:23 | Rotary Encoder Stuck In Intermediate Position: Signal Stuck Low | CLEAR the DTC. REPEAT the self-test. If the DTC returns, enter the ID located on the RDU and program into the PCM. |