DTC U0415: Invalid Data Received From Anti-Lock Brake System (ABS) Control Module

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2018 Lincoln MKX, 2018 Lincoln Continental, 2018 Ford F-550 Super Duty, 2018 Ford F-450 Super Duty, and 2018 Ford F-350 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

Failure	Action
00	This DTC sets if the SECM receives invalid data in any of the ABS module messages. Using a diagnostic scan tool, RETRIEVE and DIAGNOSE all ABS module DTCs. REFER to appropriate Anti-Lock Brake System (ABS) And Stability Control article. If the diagnostic scan tool cannot communicate with the ABS module, REFER to appropriate Module Communications Network article. If no DTCs are set in the ABS module, the concern may be intermittent. SET the ignition to OFF. DISCONNECT and INSPECT all ABS module electrical connectors and related in-line connectors for corrosion, bent pins, pushed-out pins and spread terminals. REPAIR as necessary.
81	This DTC sets if the SECM receives invalid data in any of the ABS module messages. Using a diagnostic scan tool, RETRIEVE and DIAGNOSE all ABS module DTCs. REFER to appropriate Anti-Lock Brake System (ABS) And Stability Control article. If the diagnostic scan tool cannot communicate with the ABS module, REFER to appropriate Module Communications Network article. If no DTCs are set in the ABS module, the concern may be intermittent. SET the ignition to OFF. DISCONNECT and INSPECT all ABS module electrical connectors and related in-line connectors for corrosion, bent pins, pushed-out pins and spread terminals. REPAIR as necessary.
82	This DTC sets if the SECM receives invalid data in any of the ABS module messages. Using a diagnostic scan tool, RETRIEVE and DIAGNOSE all ABS module DTCs. REFER to appropriate Anti-Lock Brake System (ABS) And Stability Control article. If the diagnostic scan tool cannot communicate with the ABS module, REFER to appropriate Module Communications Network article. If no DTCs are set in the ABS module, the concern may be intermittent. SET the ignition to OFF. DISCONNECT and INSPECT all ABS module electrical connectors and related in-line connectors for corrosion, bent pins, pushed-out pins and spread terminals. REPAIR as necessary.
83	This DTC sets if the SECM receives invalid data in any of the ABS module messages. Using a diagnostic scan tool, RETRIEVE and DIAGNOSE all ABS module DTCs. REFER to appropriate Anti-Lock Brake System (ABS) And Stability Control article. If the diagnostic scan tool cannot communicate with the ABS module, REFER to appropriate Module Communications Network article. If no DTCs are set in the ABS module, the concern may be intermittent. SET the ignition to OFF. DISCONNECT and INSPECT all ABS module electrical connectors and related in-line connectors for corrosion, bent pins, pushed-out pins and spread terminals. REPAIR as necessary.