U0413: Invalid Data Received From Battery Energy Control Module "B"
Description
NOTE:
This DTC is reporting a missing or invalid message from another module on the data bus. The module that reports the fault is not the problem module. Do not install a new acronym>RCM as part of the repair unless directed to do so in a pinpoint test.
| Failure | Action |
|---|---|
| 00 | CHECK for additional RCM and BECAME (extended power module) DTCs. DIAGNOSE and REPAIR any DTCs that are retrieved. For RCM DTCs, REFER to the RCM DTC Chart. To diagnose BECAME DTCs, REFER to the BECAME DTC Chart . |
| 56 | GO to Pinpoint Test BF |
| 92 | This DTC indicates that there is a BECAME fault present. CARRY OUT a self-test for the BECAME. DIAGNOSE and REPAIR the BECAME DTCs. REFER to the BECAME DTC Chart . |