LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2018 >> F-450 Super Duty Limited >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Electronic Engine Controls - 6.7L Power Stroke Diesel >> Removal And Installation >> Powertrain Control Module (PCM) >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Powertrain Control Module (PCM): Installation

  1. To install, reverse the removal procedure.
  2. NOTE: If the Programmable Module Installation (PMI) procedure was not successful in downloading the data from the vehicles original PCM, then the oil life data of the vehicle is lost. If this occurs, and the oil life cannot be determined through service history or customer interview, it is recommended the vehicle engine oil and filter be changed and the oil change minder reset. Restore the module configuration. Carry out the module configuration restore steps of the Programmable Module Installation (PMI) procedure. For additional information,
    NOTE: If the Body Control Module (BCM) or the PCM (or both) is being replaced, the parameters must be reset in both modules or the vehicle will experience a Passive Anti-Theft System (PATS) no start. This will occur even if the vehicle is not equipped with PATS.

    Carry out the PATS Parameter Reset. Refer to: Module Programming .

scientia non olet · About LEMON Manuals