LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2018 >> Flex SEL, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System (Abs) And Stability Control >> Removal And Installation >> Anti-Lock Brake System (ABS) Module >> Removal And Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation

NOTE: Electronic modules are sensitive to electrical charges. The Anti-lock Brake System (ABS) module can be damaged if exposed to these charges.
  1. Remove the Hydraulic Control Unit (HCU). For additional information, refer to Hydraulic Control Unit (HCU) .
  2. Remove and discard the 4 screws.

    • To install, tighten the new screws to 3 Nm (27 lb-in).

  3. Remove the ABS module.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals