Pinpoint Test E: The Traction Control System Is Inoperative Or Cannot Be Disabled Using The Message Center: Notes

WARNING: This page is about a different variant/trim than selected.

NOTE: If equipped, MyKey allows users to configure traction control to be either always on or selectable. If a MyKey restricted key is in use with the MyKey traction control feature configured to always on, traction control cannot be disabled. An admin key must be used to enable and disable traction control.

NOTE: This test requires the use of at least 2 ignition keys (passive or IKT) programmed to the vehicle; one admin ignition key and one restricted ignition key.