PINPOINT TEST E : P2535 (With Push Button Start): Notes
WARNING: This page is about a different car, the 2016 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
Diagnostic Overview
Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to Service Information .
Refer to Starting System for schematic and connector information.
Normal Operation and Fault Conditions
Refer to Starting System - With Intelligent Access (IA) .
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| P2535 | Ignition Switch Run/Start Position Circuit High | This DTC sets when the PCM detects voltage on the crank detect circuit while the engine is running. |
Possible Sources
- Ignition switch
- BCM
- PCM
- RFA module
- Wiring, terminals or connectors