Normal Operation and Fault Conditions
The RCM continuously monitors the driver seatbelt buckle switch circuits for the following faults:
- Open circuit
- Short to voltage
- Short to ground
- Current out of range
- Faulted driver seatbelt buckle switch
If a fault is detected, the RCM stores DTC B0050:11, B0050:12, B0050:13 or B0050:1D in memory and sends a message to the IPC to illuminate the airbag warning indicator.
PPT F RCM DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B0050:11 | Driver Seatbelt Sensor: Circuit Short to Ground | Sets when the RCM senses a short to ground on the driver seatbelt buckle sensor circuit for more than 6 seconds. |
| B0050:12 | Driver Seatbelt Sensor: Circuit Short to Battery | Sets when the RCM senses a short to voltage on the driver seatbelt buckle sensor circuit for more than 6 seconds. |
| B0050:13 | Driver Seatbelt Sensor: Circuit Open | Sets when the RCM senses an open on either driver seatbelt buckle sensor circuit for more than 6 seconds. |
| B0050:1D | Driver Seatbelt Sensor: Circuit Current Out of Range | Sets when the RCM measures current outside of an acceptable range on the driver seatbelt buckle sensor circuit for more than 6 seconds. |