Lane Keeping System Operation

The lane keeping system is turned on and off using the lane keeping system switch on the LH steering column multifunction switch. When a MyKey® is in use, the system defaults the lane keeping alert mode to on but the driver can activate/deactivate the system, change the mode and select all lane keeping alert intensity settings. When the system is on, it is active only when the vehicle speed is above 64 km/h (40 mph) and at least one lane marking can be detected by the camera. The system can be turned off at any time by pressing the lane keeping system switch.

The system can be temporarily suppressed at any time by the following:

• Rapid braking or acceleration
• Evasive steering maneuver
• Using the turn signal indicator (only for the side the indicator is on)