LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2018 >> Mustang EcoBoost, 2D Convertible, Standard Trans >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Climate Control System - General Information (2 Of 2) >> Diagnosis And Testing >> Climate Control System - Vehicles With: Electronic Manual Temperature Control (EMTC) >> Pinpoint Test(s) >> Pinpoint Test O : P193E >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pinpoint Test O : P193E: Notes

Refer to Manual Climate Control System for schematic and connector information.

Normal Operation and Fault Conditions 

The PCM controls the A/C compressor clutch field coil based on messages received from the BCM over the HS-CAN. When the FCIM determines it is necessary to activate the A/C compressor due to driver request or automatic climate control settings, the FCIM sends a message to the BCM over the MS-CAN, the BCM then sends a message to the PCM to activate the A/C compressor.

An internal failure of the PCM, BCM or FCIM, or a failure in the MS-CAN or HS-CAN, causes the PCM to set a DTC.

DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
P193E A/C Clutch Request Signal This DTC sets when the PCM does not receive the A/C enable request from the BCM.

Possible Sources 

scientia non olet · About LEMON Manuals