Pinpoint Test A : DTCS B1319:11, B1319:15: Notes
WARNING: This page is about a different variant/trim than selected.
DTCs B1319:11, B1319:15
Refer to Shift Interlock for schematic and connector information.
Normal Operation and Fault Conditions
The BCM provides power to the Brake Shift Interlock Actuator (BSIA). When the BCM receives a brake pedal applied input, voltage is applied to the brake shift interlock actuator. When the actuator is energized, the plunger is pulled inward allowing the selector lever to move from the park position.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B1319:11 | Brake Shift Interlock Output Circuit Short To Ground | Short to ground in the Brake Shift Interlock Actuator (BSIA) circuitry. |
| B1319:15 | Brake Shift Interlock Output Circuit Short To Battery or Open | Short to power or open in the Brake Shift Interlock Actuator (BSIA) circuitry. |
Possible Sources
- Connectors damaged or pushed-out terminals, corrosion, loose wires and missing or damaged seals
- Brake Shift Interlock Actuator (BSIA)
- BCM