Pinpoint Test P : An Individual Button Or Feature Is Inoperative From The RKE Transmitter
- P1 VERIFY THE DOOR LOCK OPERATION
- Press the lock and unlock button on the left door lock control switch while observing the door lock operation.
Do the door locks operate correctly?
Yes GO to P2. No CHECK the symptom and GO to Symptom Chart - Electrical . - P2 VERIFY THE HORN OPERATION
- Using a scan tool, view the BCM PIDs.
- Select the BCM HORN PID and active command the horn on then off.
Does the horn sound when commanded on?
Yes GO to P3. No REFER to Horn . - P3 VERIFY THE HAZARD LAMP OPERATION
- Activate the hazard flasher lamp function.
Do the hazard lamps operate correctly?
Yes GO to P4. No REFER to Exterior Lighting . - P4 VERIFY THE LUGGAGE COMPARTMENT LID RELEASE OPERATION
- Press the interior luggage compartment lid release button.
Does the luggage compartment lid latch release?
Yes For vehicles equipped with the factory remote start, GO to P5. For vehicles not equipped with the factory remote start, REPLACE the suspect IA key. PROGRAM the new IA key. REFER to Key Programming Using Diagnostic Equipment in Anti-Theft - Passive Anti-Theft System (PATS), With Intelligent Access (IA) . INFORM the customer that any IA keys not present need to be programmed. No GO to Pinpoint Test L . - P5 VERIFY THE REMOTE START BUTTON INPUT
- Using a scan tool, view the RFA module PIDs.
- Monitor the RFA module Lst_Xm_B_Prs PID while pressing the remote start button on the suspect IA key.
Does the PID indicate the remote start button is being pressed?
Yes REFER to Starting System . No REPLACE the suspect IA key. PROGRAM the new IA key. REFER to Key Programming Using Diagnostic Equipment in Anti-Theft - Passive Anti-Theft System (PATS), With Intelligent Access (IA) . INFORM the customer that any IA keys not present need to be programmed.